Ground and first floor 20x50 house design information.
Today we have brought a new Ground and First Floor 3D Elevation, which is very simple and modern, today we will talk about this 20x50 Ground and First Floor 3D Elevation, so let's know.
Today we have come up with a new Ground and First Floor 3D Elevation, which is very simple and modern, today we will talk about this 20x50 Ground and First Floor 3D Elevation, so let's know.
Today we have taken a new height which is very simple yet looks trendy. Today's new 3D upgrade plan is 20 in width and 50 in length (20x50). In this height there are stairs on the ground floor, which is going from the bottom to the terrace, in which a strap is being replaced by going on top of the mumti below, iron pipes have been given in the stairs below, the design of the verandah has been given. In which you can park the car, it is leased from the bottom, a glass railing has been given in the balcony, pipe is also given in it, along with a glass railing of 2 feet 6 and a tree bell design has been given in the side. 9 inches inside and is given!
- While building a house, consider Vastu 20x50.
- Consider the plot of land when building all these new homes 20x50.
- Along with digging the foundation of the house, insecticide should also be used along with digging 20x50.
- While making a water tank in the house, keep in mind the water proofing 20x50.
- While constructing toilets in homes, the size of the room should be increased 20x50.
- Be sure to take care of electrical pipes when filling all new flat roofs 20x50.
- While applying tiles on the roof of the house, keep in mind that there is no gap in the tiles, waterproofing chemical should be done.
- Be sure to mix a water proofing chemical when painting outside the house.
0 Comentarios